Sensors

Feature (2)
  • Fluid energy transducer developed for sensors
    Researchers of the Fraunhofer Technology Development Group TEG have created a fluidic energy transducer that has successfully managed to convert fluidic energy (from air or water) into electricity. The fluid transducer could enable sensors used in, for example, pneumatic plants to supply themselves with energy in the future.
  • Magnetostrictive linear-position sensors
    Linear-position sensors measure absolute distance along a motion axis. They are available in several technologies, each having its own advantages and disadvantages
Product (33)
  • BCM range of pressure and acceleration sensor silicon chip dies
    The BCM range of pressure and acceleration sensor silicon chip dies is small in size and each has its own function and application.
  • Endress+Hauser Prowirl 73 vortex flowmeter
    The Prowirl 73 is a stand-alone, multivariable vortex flowmeter for measuring mass flow, energy, density, temperature and volumetric flow of liquids, gases and steam.
  • Turck BIM-UNR, BIM-UNT compact sensors and Q-pak proximity sensors
    The BIM-UNR, BIM-UNT compact magnetic cylinder position sensors and Q-pak proximity sensors are now equipped with WeldGuard protection, making them impervious to weld slag and spatter often present in MIG and TIG welding environments. The WeldGuard protective material has been applied to the compact, rectangular sensors’ faces, and protective sleeves are also available to protect the attached connector and cordset.
  • Turck BIM-UNR compact magnetic cylinder position sensors
    The BIM-UNR line of compact magnetic cylinder position sensors now includes a dual sensor designed for detecting short and long stroke C-groove cylinders. BIM-UNR dual sensors provide an advantage by combining two sensors through one cable connection to speed installation, as well as lessen wire costs and connection points. This design makes the sensor beneficial in areas where multiple cylinders are used, as it only requires a single cable. It features a low profile with dimensions of 2.9 x 4.6 x 18 mm.
  • Furness Controls FCO96 series of laminar flow elements
    The FCO96 series of laminar flow elements, from Furness Controls, is a range of primary flow devices for the measurement of low volume air and gas flows from 0.1 mL/min to 10,000 L/min.
  • Boge Compressors Logair wireless communication system
    The Logair is a wireless communication system that provides remote monitoring of a compressed air system via either a PC or mobile phone. The system provides a solution where a user wants a permanent online link, a fault detector, a remote data request system and visualisation over the internet without the necessity of a comprehensive management system.
  • Nexen TL Series pneumatically engaged, single-position torque limiters
    The Nexen TL Series, pneumatically engaged, single-position torque limiters deliver overload protection for industrial machinery. The series uses a ball/detent interface and proximity sensor to immediately disengage the machine shaft when excessive torque or a machine jam occurs, effectively protecting downstream equipment and product from damage and decreasing downtime.
  • TML KP series pore pressure gauges
    The TML KP series pore pressure gauges are used to measure pore water pressure in ground, sheet piles, piles, boreholes, etc. The model KPA-PA is attached to a pile, diaphragm wall, etc and buried in the ground to measure the pore water pressure. The KPB-PA is buried directly into a borehole to measure pore water pressure in bedrock.
  • Compact dewpoint transmitter/switch
    The EE371 and EE372 from E+E are used for monitoring of dew point temperature in air systems and dryers. Using a special monolithic measurement cell, type HMC01, with an autocalibration procedure, the system achieves a measurement accuracy of ±2C Td.
  • Water-cooled pressure transducer
    The Keller water-cooled piezoresistive pressure transducer can be used for accurate static and dynamic measurements in fluids up to 350 °C.
  • Compact cylinder position transmitter
    Precisely monitoring the position of pneumatic drives has traditionally required expensive, bulky mechanical devices which are often sensitive to the environment, subject to wear and easily fall victim to mechanical damage.
  • Cylinder position transmitter
    Precisely monitoring the position of pneumatic drives has traditionally required expensive, bulky mechanical devices which are often sensitive to their environment, subject to wear and easily fall victim to mechanical damage.
  • Cylinder position sensor
    The Turck Q25L sensor is a magnetically actuated linear displacement sensor designed to detect piston position on pneumatic cylinders. Available with measuring ranges of 100, 125, 160 and 200 mm, the sensor is suitable for applications that require precise signal transmission over long measuring distances, such as pneumatic pumps, slides, blanking or moulding systems. By using an external magnet as a position indicator, the sensor may be used in additional applications such as moving platforms, point line measurement or other specially designed equipment where a cylinder is not present.
  • Indicating pressure switch/pressure transmitter
    The Noshok 800 series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.
  • Electronic process switch for standard pneumatic systems
    The 50D IP65-rated electronic pressure switch is suitable for use in pressure ranges -1 to 0 bar, -1 to 1 bar, 0 to 6 bar and 0 to 10 bar. It has two electric outputs with four output options: 2xPNP, 2xNPN, PNP+analog, NPN+analog and the analog output with free programming (4-20 mA or 0 to 10 V). The second output can be programmed as a diagnosis, allowing faster error detection.
  • Resistance thermometer
    The TECII resistance thermometers, from tecsis GmbH, have been developed especially to resist rough industrial environments. Featuring a small mass and a robust design, they are suitable for applications with a high level of vibration.
  • Sensor on pneumatic cylinder
    Turck has added a compact WIM45 magnetic field sensor to its line of cylinder position sensors. It provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders, delivering greater accuracy than indirect analog monitoring with potentiometers or linear position systems.
  • Pressure sensors for hazardous locations
    Turck has expanded its line of pressure sensors to include a specialty sensor for hazardous areas. The PT4300 is a media isolated stainless steel pressure sensor for use in oil and gas, refrigeration, gas compression, test stands and industrial OEM applications.
  • Gas and fluid pressure sensor
    The SMC series PSE 560 is a copper-free, corrosion-resistant fluid pressure sensor.
  • Sensors for switch point detection
    The Turck PK pressure sensors are designed to provide an economical means for switch point detection in air and inert gas applications. The compact sensors are IP65 rated and are suitable for use in pneumatic and robotic applications.
  • Explosion-proof RTD temperature transmitter
    Dwyer Instruments has announced its series TTE explosion-proof RTD temperature transmitter that is suitable for hazardous temperature measurement applications. The transmitter has seven pre-programmed temperature ranges that are selectable via an internal dipswitch.
  • Dual cooling system for large enclosures
    Exair's Dual Cabinet Cooler System keeps electrical enclosures cool with -7°C air to eliminate high temperature malfunction and protect sensitive electronics from harsh environments. The high cooling capacity up to 5600 Btu/h is suitable for large electrical enclosures and high heat loads.
  • Tuning fork level switch for powder, bulk or liquids
    Dwyer Instruments has launched the TFLS tuning fork level switch incorporating a piezoelectric crystal that vibrates the fork at its natural frequency.
  • Analog position sensing for pneumatic grippers
    The sensing components of the Micro-BIL mini-sensor in Balluff's range of inductive displacement sensors are housed in a conventional cylinder switch body designed for direct attachment in the widely used T-slot. The processing electronics, which are separate from the sensing head, can be located wherever convenient, such as on the side of the gripper.
  • TC400
    The TC400 from tecsis is available either as a temperature switch or as a resistance thermometer with a 4...20 mA measuring transformer and an additional switching output.
  • Inductive mini-sensors
    Balluff has developed a series of mini-sensors with large switching distances.
  • Pressure gauge
    The Swagelok PBG series pressure gauge is suitable for OEMs and panel builders. The PBG series pressure gauge monitors vacuum and positive system pressure up to 1000 bar or 1000,000 kPa and fits industry-standard 2 9/16" (65 mm) panel hole cutouts.
  • Light beam safety devices
    The M4000 family of multiple light beam safety devices offers category 4 safety in compliance with IEC 61496 and SIL 3 according to IEC 61508. The Advanced, Standard and Area versions are modular, expandable with supplementary options and offer a variety of beam numbers, separations and ranges. The basic function of all the devices is to protect access.
  • Dewpoint transmitter
    The Transmet IS is an easy-to-install, self-contained dewpoint transmitter for the measurement of the moisture content of flammable and non-flammable gases and has been designed so that it can be applied to almost any air or gas dewpoint measurement application in a classified hazardous area.
  • Pressure transmitter
    The Type 8323 pressure transmitter is designed to cover the majority of industrial applications in the field of industrial pressure measurement technology. High accuracy, compact design, robust construction and flexibility make this instrument universal and suitable for different measurement functions.
  • Refrigerant leak detector
    Javac introduces the Compass refrigerant leak detector, featuring a heated diode sensor designed for residential and commercial air conditioning leak detection applications. The easy-to-use handheld refrigerant leak detector delivers good sensitivity to all refrigerants, up to 0.15 oz/year.
  • Temperature logger and monitor
    New versions of the SynoLog series of 1- and 2-channel temperature logging as well as the 2- and 3-channel temperature/humidity logging products have been released. The SynoLog has an internal temperature sensor, external temperature probe connection, easy-to-read display, audible/visual high/low alarms and a large logging memory (over 16,000 points of data).
  • Loop powered indicator
    The Series LPI loop powered indicator accepts a 4-20 mA input signal and displays the associated process variable such as pressure, flow, temperature, level or relative humidity. The unit is equipped with a bright red, 4-digit LED for local or remote indication.
News (1)
  • Obituary
    Georg H Endress has passed away in Arlesheim, Switzerland, at the age of 84.
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in